Ultimate Guide to Cooled Water Chiller Systems

### Step-By-Step Guide to Operating a Cooled Water Chiller System.

#### Step 1: Start-Up Procedure.

1. Ensure that all valves are in the closed position.

2. Turn on the power to the chiller system.

3. Open the main water supply valve to allow water to enter the system.

4. Check the pressure gauges to ensure that they are within the correct range.

5. Open the control panel and set the desired temperature for the chilled water.

#### Step 2: Monitoring the System.

1. Monitor the temperature of the chilled water as it circulates through the system.

2. Check the pressure gauges regularly to ensure that they remain within the correct range.

3. Listen for any unusual noises coming from the chiller system, which could indicate a problem.

#### Step 3: Maintenance.

1. Regularly clean the filters and strainers to prevent any build-up that could restrict water flow.

2. Check for any leaks in the system and repair them promptly.

3. Monitor the condition of the refrigerant and top it up if necessary.

4. Schedule regular inspections by a qualified technician to ensure that the system is running efficiently.

#### Step 4: Shutting Down the System.

1. Close the main water supply valve to stop the flow of water into the system.

2. Turn off the power to the chiller system.

3. Allow the system to fully drain before performing any maintenance tasks.

4. Inspect the system for any signs of damage or wear before shutting it down completely.

By following these step-by-step instructions, you can ensure that your cooled water chiller system operates efficiently and effectively. Regular maintenance and monitoring are essential to prolong the life of the system and prevent any costly breakdowns.

The company is the world’s best Cooled Water Chiller for Air Conditioning Systems, Mini Pool Heat Pump, R32 DC Inverter Heat Pump supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.