Top Ten Questions to ask when considering purchase of a mobile impact crusher

• By
• Keith Barker
• April 10,

• Facebook
• Twitter
• LinkedIn
• Copy Link

1. What is the intended application, material type and amount of material to be processed, as well as end-product desired, and what are the projected costs per ton, after purchase, for running the machine?
2. What are the environmental considerations applicable in the area where the machine will operate, and is electric power readily available and cost-effective?
3. What are the key technical specifications of the model being considered, including: engine horsepower, weight of rotor and blow bars, as well as hopper capacity, feeding height, machine weight, dimensions and ease of transport?
4. Is the rotor drive direct-drive from the engine, electric-drive or hydraulic-drive?
5. Does the model being considered have the capability to track (move) while crushing?
6. Will your impact crusher be used in tandem with a jaw crusher or a screen plant, and how will product flow through your system? 
7. Would a built-in screen be beneficial, and what other options, including magnetic separation, conveying, feeders and integrated systems need to be considered?
8. What type/quality are key components, including wear parts, hydraulics and electronics, and what is the type and quality of steel used in frame, crusher housing and rotor? 
9. Does the impact crusher have a user friendly design, with ease of changing blow bars, and ease of access for maintenance and servicing? 
10. If a part is needed, what is the turn-around time from your distributor or manufacturer?

This top-ten list is excerpted from the RPN article, "The Rise of Mobile Impact Crushers for Recycling", from the March edition, Volume 25, Number 2.

Read more

Related Articles

Upgraded SENNEBOGEN Vario Tool built for urban demolition with new boom and bucket configurations

Share

• Facebook
• Twitter
• LinkedIn
• Copy Link

We use cookies to enhance your experience.
By continuing to visit this site you agree to our use of cookies.

Horizontal Shaft Impactor (HSI) is a type of heavy machines works to crush the rocks, stones, concretes, asphalts or other objects which need to be size reduced for preparation of next procedure in quarry, mining, cement, construction industry.

HSI impact crusher mainly consists of a motor, a rotor, aprons, impactor housing and blow bars. Working principle of a impactor is the motor drives the horizontally mounted rotor as well as the blow bars which are mounted on the rotor rotating at very high speed. The objects feed from the open inlet of impactor are hit by the blow bars towards the impact plates which are mounted on the aprons and bounced back. The objects are shattered and size reduced during this process and discharged from the outlet of impactor.

Blow bar is the key and largest wear part on impactors. As the rotor runs at very high speed, blow bars withstand huge shock and sever abrasion from the crushed objects. Blow bars are the most frequently replaced wear parts and account for a big part of operation cost of impactor. Making the blow bars works longer is so crucial to keep the impactor run time and cost efficiently.

Any failure with the blow bars costs a high lost on time and money. A good blow bar should not only last as long time as possible but also works safely without breakage. That means the blow bar must have good resistance to wear and enough resistance to impact at the same time. How to make the blow bars last longer? The answer is on the materials that blow bars are made of and the foundry where it is made by.

The crushing applications are always various due to the different natures and different sizes of crushed objects. To have the best performance in different applications, blow bars are normally made in following materials to have different natures in terms of wear and impact resistance.

Manganese steel

Manganese steel is a kind of austenitic steel with around 13% or 18% content of Manganese. It is featured with very good impact resistance but low wear resistance. Manganese steel is the first option for blow bars which used on primary or second crushers with large feed size, usually over Dia. 800mm, or applications with high content of unbreakable objects come into the impactors. A typical application of manganese blow bars is crushing the limestones in quarry plants of cement plants.

Manganese steel with Titanium Carbide (TIC) columns inserted

Due to the nature of low wear resistance of manganese steel, Titanium Carbide columns (TIC) are sometimes inserted into the wear face of manganese steel blow bars to increase its wear performance. With TIC inserts, service life of manganese blow bars could be up to 60% increased but the cost of blow bars is higher.

Martensitic alloy steel

Martensitic steel is a type of alloy steel with Molybdenum, Nickel and other alloy ingredients in its compositions. It is featured with better wear performance than manganese steel but impact performance is compromised. This nature enables martensitic blow bars to achieve better wear life in applications where the feed size is smaller or a little content of unbreakable objects contaminated. A typical application of martensitic steel blow bars are used on impactors recycling the concretes with rebars content.

If you want to learn more, please visit our website Jiafu.

Martensitic alloy steel with ceramic inserted

To obtain longer wear life of martensitic steel blow bars, industrial ceramic grits could be inserted in the martensitic steel matrix of wear areas. Thanks to the excellent wear performance of ceramics, the martensitic steel blow bars could have 100% longer wear life. However, the cost of blow bars is about 50% increased with the ceramic inserted.

Chrome white iron

Chrome white iron has higher content of carbon and chromium than manganese steel and martensitic steel, which gives chrome white iron blow bars outstanding wear performance but very low impact resistance. Chrome white with about 20% content of chromium is normally named medium chrome and around 25% is named high chrome. Blow bars made of chrome white iron are the first option for impactors crush very abrasive rocks on secondary or tertiary crushers. The size of rocks feed into the impactor must be strictly controlled, usually less than dia. 300mm, and any unbreakable objects or iron tramp is NOT allowed in feeding. A typical application of chrome white iron blow bars is used to crush natural stones or granites in aggregates or sand-making plants.

Chrome white iron with ceramic inserted

To further obtain longer wear life of chrome white iron blow bars, ceramic grits are also inserted at the wear areas. The wear life of chrome blow bars could be 100% increased but cost is also about 50% increased. Furthermore, Sunwill has special grade chrome ceramic blow bars in C650 grade, which is able to achieve up to 170% increase on wear life in very abrasive secondary or tertiary crushing applications.

All blow bars are originally made in foundries. A good foundry will not only provide the good and reliable quality of blow bars, but also be able to provide versatile and innovative solutions for specific applications at metallurgical basis.

Sunwill Machinery is a foundry with over 15 years’ experience in the manufacturing and service of blow bars. Sunwill Machinery is able to provide all above materials suits different applications, also the metallurgists and engineers know how to make the blow bars right for customer’s specific applications.

Please visit Sunwill Machinery at www.sunwillmachinery.com or drop an at  when you have any questions about the blow bars for impactors or need a site specific solution. We are happy to assist at any time.

Other topics about Sunwill Blow Bar

Part 1:Blow bars selection guidance and Impactor brands list

Part 2:How to make a good blow bar

For more Horizontal Shaft Impactorsinformation, please contact us. We will provide professional answers.